Shapetinker
Templates › Name tag or key fob
Name tag or key fob
A tag 60 × 22 mm and 2.4 mm thick with a 5 mm hole for a key ring and a name 1 mm high on top. One of the quickest things to print: ten minutes or so.
What it is good for
- Key fobs and bag tags
- Names for backpacks, lunch boxes and bottles
- Small gifts and labels for keys
How to make it
- Open the template and type the name into the text.
- Make the tag longer or shorter to fit it; the hole stays at its end.
- For a whole group, use the template "Name tags for a whole group" instead.
- Download for your printer.
Printing it
- Two colors print with one filament change at the height where the name starts.
- Rings of 1–1.5 mm wire fit the 5 mm hole; for a thicker ring make the hole bigger.
Questions and answers
Will a long name fit?
Make the tag longer or the letters smaller. Shapetinker warns when the name reaches over the edge of the tag or covers the hole.
Is 2.4 mm strong enough?
For keys, yes in PETG; in PLA give it 3 mm and 3 perimeters.
More templates
- Door signA sign 150 × 60 mm and 3 mm thick with rounded corners, raised letters 1.2 mm high and two holes for 4 mm countersunk screws.
- Name tags for a whole groupWrite the names, one per line, and Shapetinker lays out a name tag for each on the bed.
- Box with a lidYou type the inside size, the wall, the corner radius and the play between lid and box; you get a box and a lid with a rim that slides into it.
- Cookie cutter from a pictureChoose a picture with a dark shape on a light background; its outline becomes a blade 15 mm tall and 1.2 mm thin on a 1.6 mm rim that stiffens it and saves fingers.
- CoasterA round coaster 100 mm across and 4 mm thick with a rounded edge, a thin raised ring along the rim and a text bent along an arc.
- Cable holderA block 80 × 22 mm and 14 mm tall with rounded edges and four slots 7 mm wide, 5 mm above its base.
- QR code labelA label 72 × 80 mm and 2 mm thick with a raised QR code 48 mm across and a caption under it.